Jiangyin Yuanshi Heavy Industry
machinery Co.,Ltd.
Jiangyin Yuanshi Heavy Industry machinery Co.,Ltd.

86-13961664715

Home > News > Company News
News

Operation specification of horizontal baler

Release time: 2020-09-03

Source: http://www.jiangsu-pack.com/

Views: 183

Operation specification of horizontal baler
The purpose of the horizontal baler is to greatly reduce the volume, increase the density, and facilitate transportation and storage. Then ask questions. How is the device installed? Do you need to follow any operating specifications when using a horizontal baler?

How to install the horizontal packer?
1. The horizontal baler does not require foundation. Place the hydraulic baler on a flat ground and check whether the parts of the machine are loose or shifted during transportation.
2. The chain-plate feeding conveyor connected to the fully automatic baler ensures that the conveyor and the feed inlet of the baler chassis are well connected, seamless, and screw tightened.
3. Pour the standard hydraulic oil delivered by the manufacturer into the hydraulic cylinder according to the instructions. Turn on the power cord of the packer host.
4. Start the main motor power supply of the waste paper baler, and the hydraulic baler pushes the plate forward, back, stop and other electronic control debugging.
5. Start the motor power supply of the chain plate feeding conveyor, and the feeding conveyor will automatically control and debug the feeding.


Operation specification of horizontal baler

We need to abide by the correct operating specifications when using the horizontal baler. The specific operating specifications are as follows:
1. The hydraulic oil added to the oil tank of the horizontal baler should strictly use high-quality anti-wear hydraulic oil, which must be strictly filtered, and sufficient oil should be kept frequently, and the oil should be filled immediately when insufficient.
2. The oil tank of the horizontal packer should be cleaned and replaced with new oil every six months, but the first cleaning of the filtered oil should not exceed one month, and the new oil that has been used for one time is allowed to be used again after strict filtering.
3. The lubrication points of the horizontal baler should be filled with lubricant at least once per shift.
4. The debris in the material box of the horizontal packer should be cleaned up in time.
5. Those who do not understand the structure, performance and operating procedures of the horizontal baler are not allowed to start the machine without learning.
6. When the horizontal baler has serious oil leakage or abnormal phenomena during work, it should stop running immediately to analyze the cause and eliminate the fault, and it should not be forced to operate.
7. During the operation of the horizontal baler, it is not allowed to repair or touch the moving parts, and it is strictly forbidden to press materials in the bin with hands or feet.

8. When adjusting the pumps, valves, and pressure gauges of the horizontal baler, you must have experienced skilled workers. If you find that the pressure gauge is faulty, you should check or update the gauge immediately.


tag: Horizontal Baling Machine, HPM horizontal baler machine, Production of horizontal balers, horizontal baler machine model

Company News

Tel:13961664715/13921210194

Fax:0510-86156804

Add:Jiangyin Yunting Industrial Park, Jiangsu Province

Contact Us
News
我是分类列表

检测到您的IP地址为韩国,是否跳转至韩文站?