Jiangyin Yuanshi Heavy Industry
machinery Co.,Ltd.
Jiangyin Yuanshi Heavy Industry machinery Co.,Ltd.

86-13961664715

Home > News > Company News
News

Metal press pressure problem

Release time: 2020-04-24

Source: http://www.jiangsu-pack.com/

Views: 365

Metal press pressure problem
Processing waste materials through hydraulic metal press machine can improve the utilization rate of materials, and can also meet the requirements of environmental protection work. Avoid problems such as failures in the production process. Some metal briquetting equipment has problems caused by the lack of pressure during operation due to improper operation. How do we solve it?
Y83 Metal Chip Pie Press
Generally, there are several reasons why the hydraulic metal press machine is pressureless. Some of them are because there is no preparation work before installing and using the equipment, so there is no pressure during the operation of the equipment. For such problems, you can check the direction of the motor and the pressure of the oil pump to solve it. In addition, there may be no pressure during the work of some equipment because of the failure caused by the clogging of the hydraulic valve, which needs to be disassembled and replaced in time.

When the hydraulic metal press machine is installed and used, the hydraulic system leaks will also cause failure problems. Therefore, if the hydraulic system has oil leakage problems, you can determine the oil leakage problem by checking the hydraulic pipeline and other devices. Cause and specific location, so that you can deal with the problem in a timely manner.

1. First check whether the previous preparations are done. For example: the motor zero line and the front line are reversed to form a motor reversal. This can be resolved after the inspection of the motor; the oil level of the fuel tank is too low, the hydraulic pump cannot draw enough hydraulic oil, and there is no pressure. The meter can clearly see that it only needs to be filled with hydraulic oil; the pressure regulating valve does not increase the pressure, and these conditions are presented. We did not fully understand the equipment before using it.
2. The hydraulic valve block is blocked and the hydraulic valve cannot operate normally. At this time, we need to stop the hydraulic valve block. We can remove the valve block, clean it and reinstall it. If there is still no pressure, it is likely that the hydraulic valve block is broken. A new hydraulic valve block needs to be replaced.
3. The hydraulic oil leakage is serious. We need to check whether there is oil leakage in the hydraulic pipeline and hydraulic cylinder of the metal briquetting machine. This can be dealt with by replacing the pipeline seal ring and the cylinder seal ring.

Nowadays, Hydraulic Scrap Cake Presses are widely used and are widely used in metal processing places. Therefore, in order to improve the working efficiency of equipment and timely solve various hidden troubles, the application methods and skills of hydraulic metal press machine are needed. Wait for a detailed understanding to make the equipment more stable during operation. Yuan's heavy industry has many years of manufacturing experience in the field of metal hydraulics and metal packaging. We have always been your good partner in mechanical crushing hydraulics. If you need it, please contact us and we will never let you down.

Tag: metal chip pie press, Hydraulic Scrap Cake Press

Company News

Tel:13961664715/13921210194

Fax:0510-86156804

Add:Jiangyin Yunting Industrial Park, Jiangsu Province

Contact Us
News
我是分类列表

检测到您的IP地址为韩国,是否跳转至韩文站?